Bison Thor.3 Custom Motorcycle Racing Gloves
Bison Thor.3 Custom Motorcycle Racing Gloves
Our Thor.3 race gauntlets can be customized just for you and matched to your suit design. If the Thor.1 glove is a good all-arounder and the Thor.2 focuses more on protection paired with dexterity, the Thor.3 could be best described as the svelte and lightweight option of the trio.
Featuring a full top and bottom kangaroo chassis like the Thor.1 and Thor.2 models, this glove uses thinner hide with the tradeoff of even better feel versus long-term durability. These gloves were designed to satisfy the many requests from our racers who prefer a thinner, lighter glove. We looked at the competition, spec'd a chassis that mimicked the weight and feel of others on the market, then added protection in critical areas. What we ended up with was a glove that feels like it's already broken in right out of the box!
Thor.3 gloves may be trimmed down on weight, but not features. These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Exclusive "Scaled" finger segments provide overlapping, doubled-up hide over the top of the fingers
- Pull tabs on thumb and wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- Pinky/ring finger bridge standard (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuff
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
Our Thor.3 race gauntlets can be customized just for you and matched to your suit design. If the Thor.1 glove is a good all-arounder and the Thor.2 focuses more on protection paired with dexterity, the Thor.3 could be best described as the svelte and lightweight option of the trio.
Featuring a full top and bottom kangaroo chassis like the Thor.1 and Thor.2 models, this glove uses thinner hide with the tradeoff of even better feel versus long-term durability. These gloves were designed to satisfy the many requests from our racers who prefer a thinner, lighter glove. We looked at the competition, spec'd a chassis that mimicked the weight and feel of others on the market, then added protection in critical areas. What we ended up with was a glove that feels like it's already broken in right out of the box!
Thor.3 gloves may be trimmed down on weight, but not features. These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Exclusive "Scaled" finger segments provide overlapping, doubled-up hide over the top of the fingers
- Pull tabs on thumb and wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- Pinky/ring finger bridge standard (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuff
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
Bison Thor.3 Custom Motorcycle Racing Gloves
Our Thor.3 race gauntlets can be customized just for you and matched to your suit design. If the Thor.1 glove is a good all-arounder and the Thor.2 focuses more on protection paired with dexterity, the Thor.3 could be best described as the svelte and lightweight option of the trio.
Featuring a full top and bottom kangaroo chassis like the Thor.1 and Thor.2 models, this glove uses thinner hide with the tradeoff of even better feel versus long-term durability. These gloves were designed to satisfy the many requests from our racers who prefer a thinner, lighter glove. We looked at the competition, spec'd a chassis that mimicked the weight and feel of others on the market, then added protection in critical areas. What we ended up with was a glove that feels like it's already broken in right out of the box!
Thor.3 gloves may be trimmed down on weight, but not features. These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Exclusive "Scaled" finger segments provide overlapping, doubled-up hide over the top of the fingers
- Pull tabs on thumb and wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- Pinky/ring finger bridge standard (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuff
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
Our Thor.3 race gauntlets can be customized just for you and matched to your suit design. If the Thor.1 glove is a good all-arounder and the Thor.2 focuses more on protection paired with dexterity, the Thor.3 could be best described as the svelte and lightweight option of the trio.
Featuring a full top and bottom kangaroo chassis like the Thor.1 and Thor.2 models, this glove uses thinner hide with the tradeoff of even better feel versus long-term durability. These gloves were designed to satisfy the many requests from our racers who prefer a thinner, lighter glove. We looked at the competition, spec'd a chassis that mimicked the weight and feel of others on the market, then added protection in critical areas. What we ended up with was a glove that feels like it's already broken in right out of the box!
Thor.3 gloves may be trimmed down on weight, but not features. These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Exclusive "Scaled" finger segments provide overlapping, doubled-up hide over the top of the fingers
- Pull tabs on thumb and wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- Pinky/ring finger bridge standard (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuff
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
