TT Course Replica Editions
The Replica Edition boasts bright, high contrast graphics modeled after KYT racers competing around the world.
TT COURSE, the KYT full-face helmet, its captivating and extreme shapes have been studied in the wind tunnel, to achieve the best performances without neglecting style and ergonomics. The fine visor mechanism has been designed to offer practicality and efficiency at the same time. Precious inners have been optimized to offer the best performance for comfort and outflow of the air. The collaboration with aeronautics engineers, the use of special software, and the wind tunnel gave life to this innovative helmet: strong, comfortable, and performing TT Course, the racing helmet to stand out every day.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Homologation
ECE 22.05
DOT FMVSS 218
Specification
Shell
Shell is made in two sizes (M & L), ADT-advanced thermoplastic, a mix of thermoplastic resins with high resistance to crashes.
Protective Polystyrene
Internal polystyrene is realized in two sizes (M and L) to obtain better ergonomics and a variable density. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy.
Visor
The visor is made of polycarbonate, with anti-scratch treatment. The new system of hooks to the helmet and allows the visor removal without tools. TT Course has a lock system to fix the visor during the riding in the close position. TT Course is PINLOCK compatible.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Ventilation
Particular channelings obtained on polystyrene, allow to work in symbiosis with the several air intakes optimal ventilation into the helmet, and a quick exhaust of the hot air. TT Course has five air intakes on the front and four air extractors under the aerodynamics spoiler.
Inners
They are made of soft breathable bi-elastic fabric with synthetic fibers, that offer a high sweat absorption and keep fresh and dry. The cheek pads are easily removable, there are available cheek pads with different thicknesses.
Retention System
The retention system is equipped with a DD ring. It is compatible with micrometric add-ons.
Table Size
| CALOTTA / SHELL | M | L | ||||
| TAGLIA / EPS SIZE | M | L | ||||
| TAGLIA CASCO / HELMET SIZE | XS | S | M | L | XL | XXL |
| CM | 53-54 | 55-56 | 57-58 | 59-60 | 61-62 | 63 |
| ECE GR. 1450±50 | ||||||
The Replica Edition boasts bright, high contrast graphics modeled after KYT racers competing around the world.
TT COURSE, the KYT full-face helmet, its captivating and extreme shapes have been studied in the wind tunnel, to achieve the best performances without neglecting style and ergonomics. The fine visor mechanism has been designed to offer practicality and efficiency at the same time. Precious inners have been optimized to offer the best performance for comfort and outflow of the air. The collaboration with aeronautics engineers, the use of special software, and the wind tunnel gave life to this innovative helmet: strong, comfortable, and performing TT Course, the racing helmet to stand out every day.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Homologation
ECE 22.05
DOT FMVSS 218
Specification
Shell
Shell is made in two sizes (M & L), ADT-advanced thermoplastic, a mix of thermoplastic resins with high resistance to crashes.
Protective Polystyrene
Internal polystyrene is realized in two sizes (M and L) to obtain better ergonomics and a variable density. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy.
Visor
The visor is made of polycarbonate, with anti-scratch treatment. The new system of hooks to the helmet and allows the visor removal without tools. TT Course has a lock system to fix the visor during the riding in the close position. TT Course is PINLOCK compatible.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Ventilation
Particular channelings obtained on polystyrene, allow to work in symbiosis with the several air intakes optimal ventilation into the helmet, and a quick exhaust of the hot air. TT Course has five air intakes on the front and four air extractors under the aerodynamics spoiler.
Inners
They are made of soft breathable bi-elastic fabric with synthetic fibers, that offer a high sweat absorption and keep fresh and dry. The cheek pads are easily removable, there are available cheek pads with different thicknesses.
Retention System
The retention system is equipped with a DD ring. It is compatible with micrometric add-ons.
Table Size
| CALOTTA / SHELL | M | L | ||||
| TAGLIA / EPS SIZE | M | L | ||||
| TAGLIA CASCO / HELMET SIZE | XS | S | M | L | XL | XXL |
| CM | 53-54 | 55-56 | 57-58 | 59-60 | 61-62 | 63 |
| ECE GR. 1450±50 | ||||||
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
TT Course Replica Editions
The Replica Edition boasts bright, high contrast graphics modeled after KYT racers competing around the world.
TT COURSE, the KYT full-face helmet, its captivating and extreme shapes have been studied in the wind tunnel, to achieve the best performances without neglecting style and ergonomics. The fine visor mechanism has been designed to offer practicality and efficiency at the same time. Precious inners have been optimized to offer the best performance for comfort and outflow of the air. The collaboration with aeronautics engineers, the use of special software, and the wind tunnel gave life to this innovative helmet: strong, comfortable, and performing TT Course, the racing helmet to stand out every day.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Homologation
ECE 22.05
DOT FMVSS 218
Specification
Shell
Shell is made in two sizes (M & L), ADT-advanced thermoplastic, a mix of thermoplastic resins with high resistance to crashes.
Protective Polystyrene
Internal polystyrene is realized in two sizes (M and L) to obtain better ergonomics and a variable density. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy.
Visor
The visor is made of polycarbonate, with anti-scratch treatment. The new system of hooks to the helmet and allows the visor removal without tools. TT Course has a lock system to fix the visor during the riding in the close position. TT Course is PINLOCK compatible.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Ventilation
Particular channelings obtained on polystyrene, allow to work in symbiosis with the several air intakes optimal ventilation into the helmet, and a quick exhaust of the hot air. TT Course has five air intakes on the front and four air extractors under the aerodynamics spoiler.
Inners
They are made of soft breathable bi-elastic fabric with synthetic fibers, that offer a high sweat absorption and keep fresh and dry. The cheek pads are easily removable, there are available cheek pads with different thicknesses.
Retention System
The retention system is equipped with a DD ring. It is compatible with micrometric add-ons.
Table Size
| CALOTTA / SHELL | M | L | ||||
| TAGLIA / EPS SIZE | M | L | ||||
| TAGLIA CASCO / HELMET SIZE | XS | S | M | L | XL | XXL |
| CM | 53-54 | 55-56 | 57-58 | 59-60 | 61-62 | 63 |
| ECE GR. 1450±50 | ||||||
The Replica Edition boasts bright, high contrast graphics modeled after KYT racers competing around the world.
TT COURSE, the KYT full-face helmet, its captivating and extreme shapes have been studied in the wind tunnel, to achieve the best performances without neglecting style and ergonomics. The fine visor mechanism has been designed to offer practicality and efficiency at the same time. Precious inners have been optimized to offer the best performance for comfort and outflow of the air. The collaboration with aeronautics engineers, the use of special software, and the wind tunnel gave life to this innovative helmet: strong, comfortable, and performing TT Course, the racing helmet to stand out every day.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Homologation
ECE 22.05
DOT FMVSS 218
Specification
Shell
Shell is made in two sizes (M & L), ADT-advanced thermoplastic, a mix of thermoplastic resins with high resistance to crashes.
Protective Polystyrene
Internal polystyrene is realized in two sizes (M and L) to obtain better ergonomics and a variable density. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy.
Visor
The visor is made of polycarbonate, with anti-scratch treatment. The new system of hooks to the helmet and allows the visor removal without tools. TT Course has a lock system to fix the visor during the riding in the close position. TT Course is PINLOCK compatible.
***HELMET COMES WITH CLEAR VISOR - TINTED VISOR NOT INCLUDED***
Ventilation
Particular channelings obtained on polystyrene, allow to work in symbiosis with the several air intakes optimal ventilation into the helmet, and a quick exhaust of the hot air. TT Course has five air intakes on the front and four air extractors under the aerodynamics spoiler.
Inners
They are made of soft breathable bi-elastic fabric with synthetic fibers, that offer a high sweat absorption and keep fresh and dry. The cheek pads are easily removable, there are available cheek pads with different thicknesses.
Retention System
The retention system is equipped with a DD ring. It is compatible with micrometric add-ons.
Table Size
| CALOTTA / SHELL | M | L | ||||
| TAGLIA / EPS SIZE | M | L | ||||
| TAGLIA CASCO / HELMET SIZE | XS | S | M | L | XL | XXL |
| CM | 53-54 | 55-56 | 57-58 | 59-60 | 61-62 | 63 |
| ECE GR. 1450±50 | ||||||
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
