Bison Thor.4 Custom Motorcycle Racing Gloves
Introducing the newest model in the excellent Bison glove lineup: The Thor.4 race gauntlet! If the Thor.2 focuses more on protection paired with wrist dexterity and the Thor.3 could be best described as the svelte and lightweight option of the trio, our Thor.4 slots right in between! Perhaps best of all, these gloves can be customized just for you and matched to your suit design.
Featuring a full top and bottom kangaroo chassis like the Thor.2 and Thor.3 models, these gloves were designed to be the spiritual successor to our popular-yet-dated Thor.1 model. What we ended up with was a glove that is sure to please, no matter your preferences!
These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Plastic slider on the outside of the hand for added impact protection
- Large, padded carbon fiber cuff sliders
- Pull tab on wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- The Thor.4 pinky/ring finger bridge is smaller and less "intrusive" than that on the Thor.2 and .3 (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuffs
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
Introducing the newest model in the excellent Bison glove lineup: The Thor.4 race gauntlet! If the Thor.2 focuses more on protection paired with wrist dexterity and the Thor.3 could be best described as the svelte and lightweight option of the trio, our Thor.4 slots right in between! Perhaps best of all, these gloves can be customized just for you and matched to your suit design.
Featuring a full top and bottom kangaroo chassis like the Thor.2 and Thor.3 models, these gloves were designed to be the spiritual successor to our popular-yet-dated Thor.1 model. What we ended up with was a glove that is sure to please, no matter your preferences!
These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Plastic slider on the outside of the hand for added impact protection
- Large, padded carbon fiber cuff sliders
- Pull tab on wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- The Thor.4 pinky/ring finger bridge is smaller and less "intrusive" than that on the Thor.2 and .3 (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuffs
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
Bison Thor.4 Custom Motorcycle Racing Gloves
Introducing the newest model in the excellent Bison glove lineup: The Thor.4 race gauntlet! If the Thor.2 focuses more on protection paired with wrist dexterity and the Thor.3 could be best described as the svelte and lightweight option of the trio, our Thor.4 slots right in between! Perhaps best of all, these gloves can be customized just for you and matched to your suit design.
Featuring a full top and bottom kangaroo chassis like the Thor.2 and Thor.3 models, these gloves were designed to be the spiritual successor to our popular-yet-dated Thor.1 model. What we ended up with was a glove that is sure to please, no matter your preferences!
These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Plastic slider on the outside of the hand for added impact protection
- Large, padded carbon fiber cuff sliders
- Pull tab on wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- The Thor.4 pinky/ring finger bridge is smaller and less "intrusive" than that on the Thor.2 and .3 (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuffs
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
Introducing the newest model in the excellent Bison glove lineup: The Thor.4 race gauntlet! If the Thor.2 focuses more on protection paired with wrist dexterity and the Thor.3 could be best described as the svelte and lightweight option of the trio, our Thor.4 slots right in between! Perhaps best of all, these gloves can be customized just for you and matched to your suit design.
Featuring a full top and bottom kangaroo chassis like the Thor.2 and Thor.3 models, these gloves were designed to be the spiritual successor to our popular-yet-dated Thor.1 model. What we ended up with was a glove that is sure to please, no matter your preferences!
These gauntlets feature the following features standard:
- Full kangaroo hide chassis
- Double stitched seams throughout featuring Coats nylon thread
- Reinforced finger tips and palm for added wear resistance
- Plastic palm slider pucks backed with comfort foam
- Plastic slider on the outside of the hand for added impact protection
- Large, padded carbon fiber cuff sliders
- Pull tab on wrist for easier ingress
- Accordion joints at all knuckles for maximum comfort and mobility
- The Thor.4 pinky/ring finger bridge is smaller and less "intrusive" than that on the Thor.2 and .3 (can be built without)
- Rubber Bison branded elements
- Extended length single-strap cuffs
Special note: Custom size gloves can be made upon request at an additional $25. Please be advised we only recommend going with custom sizing if you don't fit in any of our stock sizes or if you have uniquely-proportioned hands or fingers.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
