Helite E-Vest Replacement Canister
Helite E-Vest Replacement Canister
2025 Preseason Update: Due to extremely high demand (which has been increased by MotoAmerica's requirement for racers to wear air vests), Helite is working hard to keep up with production on vests and refill canisters. Because of this, when you order your Helite product, we cannot guarantee that the vests or canisters will be in stock at our HQ. In regards to vests specifically, in most cases we receive vest orders from Helite within the 60 day window it takes to get your Bison suit produced, so this should not affect you. If there is an unforeseen delay, we will do our best to keep you abreast of timelines and updates from the manufacturer. If you have any questions or would like the latest status update for please don't hesitate to contact us via email, phone or chat here on the website.
This replacement cartridge is intended for use with the INTEGRATED E-VEST. Please do not order this cartridge if you are using another model such as the GP Air, as it will not work.
Every AirHide-integrated Helite E-Vest comes with a canister pre-installed. Get extras right here! After a deployment, your airbag will automatically deflate and be ready to be re-armed with the installation of a new E-C02 canister.
Can I bring my HELITE product on the plane?
Yes legally, you can take your airbag with CO2 cartridge on a plane in a checked bag. The CO2 cartridge is considered non-flammable dangerous goods. Airlines can confiscate your cartridge for no reason. To increase the chances that your cartridges arrive safely we advise you to download and print the form for traveling with dangerous goods and leave them near the cartridges and the airbag.
We also advise you to leave the cartridge screwed into the airbag and keep additional cartridges close to the vest to help the authorities to understand what they will be used for.
DOWNLOAD AND PRINT THE TSA CO2 PAGE BEFORE YOUR FLIGHT HERE
2025 Preseason Update: Due to extremely high demand (which has been increased by MotoAmerica's requirement for racers to wear air vests), Helite is working hard to keep up with production on vests and refill canisters. Because of this, when you order your Helite product, we cannot guarantee that the vests or canisters will be in stock at our HQ. In regards to vests specifically, in most cases we receive vest orders from Helite within the 60 day window it takes to get your Bison suit produced, so this should not affect you. If there is an unforeseen delay, we will do our best to keep you abreast of timelines and updates from the manufacturer. If you have any questions or would like the latest status update for please don't hesitate to contact us via email, phone or chat here on the website.
This replacement cartridge is intended for use with the INTEGRATED E-VEST. Please do not order this cartridge if you are using another model such as the GP Air, as it will not work.
Every AirHide-integrated Helite E-Vest comes with a canister pre-installed. Get extras right here! After a deployment, your airbag will automatically deflate and be ready to be re-armed with the installation of a new E-C02 canister.
Can I bring my HELITE product on the plane?
Yes legally, you can take your airbag with CO2 cartridge on a plane in a checked bag. The CO2 cartridge is considered non-flammable dangerous goods. Airlines can confiscate your cartridge for no reason. To increase the chances that your cartridges arrive safely we advise you to download and print the form for traveling with dangerous goods and leave them near the cartridges and the airbag.
We also advise you to leave the cartridge screwed into the airbag and keep additional cartridges close to the vest to help the authorities to understand what they will be used for.
DOWNLOAD AND PRINT THE TSA CO2 PAGE BEFORE YOUR FLIGHT HERE
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
Helite E-Vest Replacement Canister
2025 Preseason Update: Due to extremely high demand (which has been increased by MotoAmerica's requirement for racers to wear air vests), Helite is working hard to keep up with production on vests and refill canisters. Because of this, when you order your Helite product, we cannot guarantee that the vests or canisters will be in stock at our HQ. In regards to vests specifically, in most cases we receive vest orders from Helite within the 60 day window it takes to get your Bison suit produced, so this should not affect you. If there is an unforeseen delay, we will do our best to keep you abreast of timelines and updates from the manufacturer. If you have any questions or would like the latest status update for please don't hesitate to contact us via email, phone or chat here on the website.
This replacement cartridge is intended for use with the INTEGRATED E-VEST. Please do not order this cartridge if you are using another model such as the GP Air, as it will not work.
Every AirHide-integrated Helite E-Vest comes with a canister pre-installed. Get extras right here! After a deployment, your airbag will automatically deflate and be ready to be re-armed with the installation of a new E-C02 canister.
Can I bring my HELITE product on the plane?
Yes legally, you can take your airbag with CO2 cartridge on a plane in a checked bag. The CO2 cartridge is considered non-flammable dangerous goods. Airlines can confiscate your cartridge for no reason. To increase the chances that your cartridges arrive safely we advise you to download and print the form for traveling with dangerous goods and leave them near the cartridges and the airbag.
We also advise you to leave the cartridge screwed into the airbag and keep additional cartridges close to the vest to help the authorities to understand what they will be used for.
DOWNLOAD AND PRINT THE TSA CO2 PAGE BEFORE YOUR FLIGHT HERE
2025 Preseason Update: Due to extremely high demand (which has been increased by MotoAmerica's requirement for racers to wear air vests), Helite is working hard to keep up with production on vests and refill canisters. Because of this, when you order your Helite product, we cannot guarantee that the vests or canisters will be in stock at our HQ. In regards to vests specifically, in most cases we receive vest orders from Helite within the 60 day window it takes to get your Bison suit produced, so this should not affect you. If there is an unforeseen delay, we will do our best to keep you abreast of timelines and updates from the manufacturer. If you have any questions or would like the latest status update for please don't hesitate to contact us via email, phone or chat here on the website.
This replacement cartridge is intended for use with the INTEGRATED E-VEST. Please do not order this cartridge if you are using another model such as the GP Air, as it will not work.
Every AirHide-integrated Helite E-Vest comes with a canister pre-installed. Get extras right here! After a deployment, your airbag will automatically deflate and be ready to be re-armed with the installation of a new E-C02 canister.
Can I bring my HELITE product on the plane?
Yes legally, you can take your airbag with CO2 cartridge on a plane in a checked bag. The CO2 cartridge is considered non-flammable dangerous goods. Airlines can confiscate your cartridge for no reason. To increase the chances that your cartridges arrive safely we advise you to download and print the form for traveling with dangerous goods and leave them near the cartridges and the airbag.
We also advise you to leave the cartridge screwed into the airbag and keep additional cartridges close to the vest to help the authorities to understand what they will be used for.
DOWNLOAD AND PRINT THE TSA CO2 PAGE BEFORE YOUR FLIGHT HERE
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
It is important to keep in mind that direct print on kangaroo hide is not as durable (long-lasting) as print on cowhide. For this reason, we ask that you consider this when designing your suit and gloves. Your Gear Customization Specialist will assist you in this area. We may utilize cowhide in printed areas or cut/stitch patterns and designs when possible. Please contact us for specific information and questions regarding kangaroo printing.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
The state of California has banned the sale of all items containing kangaroo leather. Therefore, Bison Track LLC does not import, import for sale, sell or ship products made with kangaroo leather to customers in the State of California.
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
For Custom Built Orders the design process can be completed in as quickly as 24 hours, however it isn’t unusual for us to spend time with the customer tweaking and modifying designs. This means the design time varies greatly from customer to customer. Our average design time is about two weeks but again - this is dependent on how intricate the design is and how quickly you make the decision to finalize the design. Once said design is approved and we have measurements, completed suit and/or gloves are typically in your hands in under 60 days!
Orders with only Ready to wear Items will generally be shipped within two business days. See specific product descriptions for expectations on custom items.For more details, click here
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
We accept returns on eligible items within 30 days of delivery.Items must be unused, in original condition, and in the original packaging.
Return shipping is the responsibility of the customer unless the item is defective or damaged.
Refunds will be processed once your return is received and inspected.
Custom-built and personalized products are not eligible for returns once production begins.You may cancel before production starts for a 95% refund.After production starts or the order ships, all sales are final.
You can always contact us for any return question at info@bisontrack.com.
